Bike Trailer Tent

by Salamandar in Outside > Camping

345 Views, 1 Favorites, 0 Comments

Bike Trailer Tent

Bike trailer tent built from an old transport trailer and a camping bed tent

Supplies

camping bed tent

2 aluminum square tubes 2.5m

3 aluminum square tubes 1m

10 safety cotter pins

2 aluminum U-profiles 1m

20 pipe plugs

approx. 90 blind rivets

1 aluminum round tube 1m

5m Tesaband

Steel angle 90°

HDF board 1.20 x 0.60m

Steel angle T

10 screws M5

10 nuts M5

Old Transport Trailer...

Old Transport Trailer...

Camping Bed Tent

only the tent is used

Remove Tube Plugs

the trailer's frame tubes are open in the direction of travel, making extension easy

Material

Required: HDF sheet, aluminum profiles, angle joints and many blind rivets

Frame Extension

behind the frame extension with tent holes at the ends.

Front Frame Extension

Front frame extension with sleeping surface

Panel

3 mm HDF panel

Top side coated, bottom side sealed

Tent Supports

front and rear tent supports are removable for travelling

Sleeping Surface

Sleeping surface : 194 cm x 60 cm

Stands

Crutch assembly

These can be unscrewed to save space

Transportation Position

The landing gear are inserted into the trailer housings and locked in place.

Finishing Touch

HDF edge covering

Protective Cover

Securing the protective tarpaulin

Top

... and on top, you can also carry a lot of stuff...

Final Assembly

Simple conversion from transport trailer to motorhome

Rear Signalization

eye-catching rear element

Final Assembly: Tent