Arduino Tutorial - Stepper Motor Control With Driver ULN 2003

by Tech Hunt in Circuits > Arduino

2109 Views, 10 Favorites, 0 Comments

Arduino Tutorial - Stepper Motor Control With Driver ULN 2003

This instructable is the written version of my "Arduino :How To Control a Stepper Motor with ULN 2003 Motor Driver" YouTube video that I've uploaded recently. I strongly recommend you to check it out.

Tutorial

In this tutorial you will learn how to control a stepper motor using your ULN 2003 motor control chip

Stepper motors fall somewhere in between a regular DC motor and a servo motor. They have the advantage that they can be positioned accurately, moved forward or backwards one 'step' at a time, but they can also rotate continuously.

Hardware Required

In this tutorial you will learn how to control a stepper motor using your ULN 2003 motor Driver

Stepper motors fall somewhere in between a regular DC motor and a servo motor. They have the advantage that they can be positioned accurately, moved forward or backwards one 'step' at a time, but they can also rotate continuously.

Circuit & Connections

Connection

In1 - D8

In2 - D9

In3 - D10

In4 - D11

GND - GND

VCC - 5V

Programming

If I Was Helpful

First of all, I would like to thank you for reading this guide ! I hope it helps you.

If you want to support me, you can subscribe my channel and watch my videos.

My YouTube Channel

My Blogger