Arduino Nano BMP180 Weather Monitor With OLED

by devkrishnavhora in Circuits > Arduino

50 Views, 0 Favorites, 0 Comments

Arduino Nano BMP180 Weather Monitor With OLED

In this project, we will build a simple weather monitoring system using an Arduino Nano, GY-68 BMP180 pressure sensor, and an I2C OLED display.

The BMP180 measures temperature and atmospheric pressure, and the Arduino calculates the approximate altitude. The readings are displayed on the OLED screen and can also be viewed in the Serial Monitor.

Supplies

Arduino Nano

Deshbot shield

GY-68 BMP180 pressure sensor

0.96-inch I2C OLED display

Jumper wires

Breadboard

USB cable

Wiring

BMP180 to Arduino Nano

BMP180 Arduino Nano
-------------------------
VCC → 3.3V
GND → GND
SDA → A3
SCL → A1

OLED to Arduino Nano

OLED Arduino Nano
-------------------------
VCC → 5V
GND → GND
SDA → A4
SCL → A5

The BMP180 uses software I2C on A3/A1, while the OLED uses the Nano's hardware I2C pins A4/A5.

How It Works

The BMP180 measures atmospheric pressure and temperature.

The Arduino Nano reads these values from the sensor and displays them on the OLED:

  1. Temperature in °C
  2. Pressure in hPa
  3. Approximate altitude in meters

The OLED continuously updates the measurements every second.

The project is useful as a simple temperature and atmospheric pressure monitor and can also be expanded into a weather station, altitude meter, or environmental monitoring system.

OLED Display

The display shows:

BMP180 SENSOR

Temp: 28.5 C
Press: 1008.4 hPa
Alt: 56.2 m

The actual values will depend on your location and current atmospheric conditions.

Software

The project uses the Arduino IDE.

For the OLED, install:

  1. Adafruit GFX Library
  2. Adafruit SSD1306 Library

Upload the provided Arduino code to the Nano and open the Serial Monitor at 9600 baud to see the sensor readings.

Applications

This project can be used for:

  1. Temperature monitoring
  2. Atmospheric pressure monitoring
  3. Basic weather stations
  4. Altitude measurement
  5. Arduino learning projects
  6. Environmental monitoring


Downloads

Conclusion

This is a simple project that combines the Arduino Nano, BMP180 sensor, and OLED display to create a compact environmental monitoring system. It is a good starting point for more advanced Arduino weather-station and sensor projects.