Animated Yautja Predator Sign

by Kotheson in Circuits > Gadgets

134 Views, 2 Favorites, 0 Comments

Animated Yautja Predator Sign

I'm a huge fan of the Predator franchise. I love the bracelet display, console.

So I decided to make a decorative replica, simplifying it a lot and leaving just two Yautja symbols, which act as a countdown with upward acceleration.

Supplies

Links are to get the exactly component.

Once you got it, you can search on local stores.

Neopixels. Amazon

Switcher Aliexpress

MT3608 Aliexpress

Battery Holder Aliexpress

Arduino Nano

OVERVIEW

The Sign is made of MDF, PLA print and Acrylic.(Photo 1)

It´s mounted like a simple Box, with a Cover Front mdf part. And two mdf Frames for decoration.

Laser cut the model you want, holded by battery or 5 volts cable. (Photo 2)

Engrave and cut the acrylic pieces. (Photo 3)

MAKING THE BOX

Glue Front to Bottom, then Left and Right, and finally the Top part. Left the Back part for now.

Neopixel Wiring

Use the Stencil to place and solder the Neopixels. (Photo 1)

Pre-solder the Neopixels.

Make two Neopixels lines. (Photo 2-4)

Use grey or darker filament, to prevent the light from blending between Neopixels.

Gluing the 3D Parts

Glue the Neopixels strips to the 3D part.

Glue the 3D part with neopixels to the Frontal MDF part.

Electronics

There are two ways to do this: with batteries or directly from a 5-volt charger. (Photo 1)

I made the battery option. (Photo 2)

Battery

Because of the 18650 battery holder you must use batteries with protude at one end.

Add the Cover and Frames

Glue the Cover part to the "Box".(Photo 1)

Glue the frames at place. (Photo 2)

Back Side

Choose the mode that interests you.

Color

Red would be the color for the Predator, but you can use any color by easy coding.

Downloads