3D Enderman Instructables

by Luv_Will in Workshop > 3D Printing

338 Views, 0 Favorites, 0 Comments

3D Enderman Instructables

My names is Willow Williams and I'm 14 years old. I made a 3D enderman for my robotics class at EHMS. Here is an instructable to tell how you can make one yourself.

Supplies

https://www.tinkercad.com/dashboard

Tinkercad

Step 1 - open up tinkercad and make a new 3D design.

Head

Step 2 -

Head: Get a cube on the work plane and make the sizing as

  • Width: 15.00
  • Length: 15.50
  • Height: 15.00

Put the color as black

Eyes: get 3 cubes and put all the sizes as

  • Width: 1.50
  • Length: 1.00
  • Height: 1.50

Put one cube as the color of magenta and the others light pink. Then put them all together and group it. (put snap grid to 0.5mm to make it easier). Duplicate the grouped eye and put them on the black cube. Group all of it. (Make sure the colors are multicolor

Rest of the Body

Step 3 -

Body: Get another cube and make the sizing as

  • Width: 18.00
  • Length: 8.00
  • Height: 28.00

Put the color as black

Arm: Put another cube on the work plane and size it as

  • Width: 4.16
  • Length: 49.18
  • Height: 5.00

Put the color as black and duplicate it

Legs: Get another cube and size it as

  • Width: 3.00
  • Length: 4.85
  • Height: 49.06

Put the color as black and duplicate it

Assemble All Parts

Step 4 - Assemble all parts you have created. Look at the picture for reference.

*Make blocks and additional touch ups for the enderman. Look a the last two pictures.*